HPLC Solvent Handling Component Accessories
Optimize Technologies OPTI-SEAL UHMW-PE Wash Seal for HP 1050, 1100, 1200
Optimize Piston Seals are the longest lasting seals on the market. Machined from either of two proprietary polymer blends, UHMW-PE or ITB, Optimize Seals provide the ultimate in high pressure sealing capacity. For mostly aqueous buffered mobile phases, Opti-Seal™ UHMW-polyethylene is the wisest choice. Specially designed to be more resistant to abrasion and wear than standard polyethylene seals, they can last up to seven times longer under mostly aqueous conditions. Despite the UHMW-PE's durability, it has a coefficient of friction approaching that of PTFE. The homogenous polymer nature leads to less shedding, but when it does occur, a larger, more fibrous particle is produced which is easily caught by a filter frit. This item is equivalent to OEM part number 0905-1175.
Waters Corp Waters Bottle Cap, 1.00 in Neck, Polyethylene, 1 L, 4/pk
This polyethylene cap is designed for 1 L solvent bottles to prevent the free exchange of atmospheric gases, while accommodating various lines for fluid transfer.
- Designed for 1 L solvent bottles.
- Prevents free exchange of atmospheric gases with helium.
- Does not sustain internal pressure build-up.
- Features three holes for tubing.
- Accommodates a helium inlet line.
- Accommodates a helium exhaust line.
- Accommodates a solvent inlet line.
- Constructed from polyethylene.
- Compatible with 1.00 in neck bottles.
- Supplied in packs of four.
- Suitable for HPLC systems.
- Designed for tubing with 1/8 in OD.
Optimize Technologies OPTI-MAX Outlet Cartridge Check Valve, 1/16" Ceramic Ball/Ceramic Seat, PEEK Cartridge, Waters 625/626 Biocompatible
Opti-Max™ Cartridge Check Valves are designed to offer maximum performance and ease of use. From the sharp, consistent threads on OPTI-MAX™ custom housings, to the exacting standards used to match ball/seat sets in OPTI-MAX™ cartridges, every aspect of design and manufacturing reflects an unavoidable fact: when it comes to reliable check valve operation, quality and precision make a big difference. OPTI-MAX™ check valves offer many advantages over OEM check valve systems, and are better designed, better made and more reliable than any other after-market check valve product. Additionally, OPTI-MAX™ Free-Turn™ housings can be removed with the tubing still attached, accelerating check valve maintenance while reducing fitting wear. This item is equivalent to OEM part number WAT030543.
Microsolv Technology Corporation Last Drop Fltr 2Um Ss W/Adapt
Mobile Phase Filter, 2um, Last Drop, Stainless Steel, Tripod Tubing Connector. MicroSolv Brand. 1/EA.
Alkali Scientific BrightStar Polycarbonate Track Etched (PCTE) Membrane, disk diam.47mm, Pore 10µm (100 pcs)
BrightStar Polycarbonate Track Etched (PCTE) membrane filters are precision manufactured for applications requiring uniform pore and high particle retention accuracy. These membranes feature a disk diameter of 47 mm with a defined pore of 10 µm, providing consistent flow rates and reliable filtration results. Made from durable polycarbonate material, the track etched structure ensures straight cylindrical pores for accurate particle capture and microscopic analysis. Ideal for laboratory filtration, particle analysis, environmental monitoring, and cell biology applications. Supplied as a convenient pack of 100 membranes, these filters are designed for compatibility with standard 47 mm filter holders and laboratory filtration systems.
Bellco Glass, Inc. 3-Port Sparger Assembly W/Frit,36L For Vertical Side Arm Vessels
316-l stainless steel ra32 or better finish10 micron porosity stainless steel frit for low profile vertical side arm vessels. MADE IN THE USA. Frit is removable for cleaning. Comes with 45mm blue polypropylene open top cap and silicone gasketTriple tube configuration With Vent, Fill/Sample And Sparge.
Optimize Technologies OPTI-MAX Outlet Cartridge Check Valve, 1/16" Ceramic Ball & Seat, Stainless Steel Cartridge, LKB 2150, 2248
Opti-Max™ Cartridge Check Valves are designed to offer maximum performance and ease of use. From the sharp, consistent threads on OPTI-MAX™ custom housings, to the exacting standards used to match ball/seat sets in OPTI-MAX™ cartridges, every aspect of design and manufacturing reflects an unavoidable fact: when it comes to reliable check valve operation, quality and precision make a big difference. OPTI-MAX™ check valves offer many advantages over OEM check valve systems, and are better designed, better made and more reliable than any other after-market check valve product. Additionally, OPTI-MAX™ Free-Turn™ housings can be removed with the tubing still attached, accelerating check valve maintenance while reducing fitting wear. This item is equivalent to OEM part number 80-1035-20.
Beckman Coulter CytoFLEX Waste Bottle Kit (replacement waste bottle for CytoFLEX flow cytometers)
Beckman Coulter CytoFLEX waste bottle kit (manufacturer part number A04-1-0037) is a replacement consumable used to collect liquid waste from CytoFLEX flow cytometers. The manufacturer lists this kit as a consumable/replacement part for the CytoFLEX platform; confirm kit contents and capacity with the manufacturer or an authorized distributor.
- Collects and contains instrument liquid waste during operation.
- Compatible with CytoFLEX platform models.
- Sold as a replacement consumable to support routine maintenance.
- Manufacturer documentation does not specify bottle capacity; confirm before ordering.
- Helps maintain instrument hygiene and simplifies waste disposal.
Phenomenex Inc 5-port GL/DIN45 Cap and 6-month Exhaust Filter
SecurityCAP™ Waste Starter Kit AC1-1545
Phenomenex Inc 2-port GL45 Caps (x4) and 6-month Safety Filter (x4)
SecurityCAP™ Mobile Phase Starter Kit AC2-4245
Foxx Life Sciences EZwaste HPLC Solvent Waste System, Replacement Fittings, 3/8 Inch Hose Barb Fittings for 3/8 Inch ID Tubing, Black Fitting, 1/8 Inch MNPT Thread, 10/PK
330-0947-OEM: EZwaste Replacement Fittings, 1/8" MNPT, 3/8" HB, 10/pk. Foxx Life Sciences' replacement fittings secure waste tubes to carbos, providing the closed system necessary to prevent spills. The EZwaste Solvent Waste System is designed to be an affordable solution for HPLC liquid waste disposal. Each system is manufactured to safely collect waste from two HPLC machines. This system features an activated carbon filter, which traps volatile organic compounds from being released into the air. This prevents chemicals from being inhaled by lab workers, and provides an easy mechanism of disposal for vapor wastes. The EZwaste Solvent Waste system also features a closed-loop design which protects against leaks and spills, improving overall lab safety.